I think that my problem is related with this subject.
I am the major deriver from the old Boeing 767 mesh with over 100 airlines derived.
I have an Airbus A380 mesh which is slichtly bigger, still without an interior.
My first class seat which I already made narrower for a better fit related to the avatar, is still wider than the 767 mesh economy class chair upper image), leaving little room in the path when I put my chair in the 767 mesh (lower image). The 767 mesh has a 2-3-2 configuration, while the planned configuration for my A340 is 2 x 4 seats wide for economy class. Other configurations may happen in the future with more airplane types planned (B787, A380, B747, ERJ-190 and some Tupolev and Antonovs. (The lower image is a stripped 767 mesh used as freighter).
So you'll understand that I am going to have problems to fit the seats in properly without upscaling the planes in order to keep them in proper size related to the old 767 mesh (which may be slightly too small, but I am not sure about that.)
Any sugguestions to fix this?
[EDIT] split this into isn't own topic, kat